|
Overview: |
- There are three active sandblast system couplings; HOSE ENDS which are used to make hose to hose connections
or hose to blast pot connections, NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle,
and the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot.
All three are available in aluminum or brass. Hose ends are also available in Iron.
- THREADED POT ENDS do not fit the hose, but rather are threaded (NPT or NPS) onto the sandblast pot. Once properly threaded to the discharge pipe
on the pot, the 2 lug crowfoot design can now be connected to the 2 lug crowfoot design of the hose end. Now the pot can supply mix to the operator by
way of the hose to the sandblast nozzle.
|
|
Other Components: |
|
|
|
Safety Warnings: |
- Please do not mix Jason Industrial couplings with other products.
|
|
Aluminum
Part Number |
Brass
Part Number |
Thread |
|
SB1A
|
SB1B
|
1-1/4" Female NPT |
|
SB10A
|
SB10B
|
1-1/4" Female NPS |
|
SB2A
|
SB2B
|
1-1/2" Female NPT |
|
SB20A
|
SB20B
|
1-1/2" Female NPS |
|
Replacement Gasket |
|
QW
|
Replacement Gasket for Metal Hose End/Pot End. One Size Fits All |
Jason Industrial Inc. disclaims any liability for use of their products in applications other than which they are designed.
