FF9300-75-0001 Hansen® by Danfoss | FLOCS Quick Disconnect Oil Thief System | Sample Bottle Thread Size: 1.480-6 (or 38mm) | Buna-N Seal

FF9300-75-0001 Hansen® by Danfoss | FLOCS Quick Disconnect Oil Thief System | Sample Bottle Thread Size: 1.480-6 (or 38mm) | Buna-N Seal

Sale price$489.08
Buy more, save moreDiscounts applied in cart/checkout.
Overview:
  • With the spectrographic analysis of engine oil being increasingly required, the problem of obtaining oil samples quickly, economically and efficiently has demanded more attention.
  • With the push of a button, an oil sample can be taken during the evacuation cycle of any FLOCS unit and collected in a standard sampling bottle for analysis. It takes less than 15 seconds to collect an oil sample with the Oil Thief.
Features:
  • Buna-N Seals for -40 to +225 Degrees Fahrenheit Service. Vacuum Capable to 28" Hg.
  • Push-button operation.
  • Light weight.
  • Repairable seals.
  • In a typical FLOCS system, a Male NPTF-to-Male NPTF adapter (2083-12-12S) is used on one end of the Oil Thief to connect to the female quic kdisconnect coupling.
Benefits:
  • No-mess oil sample.
  • Economical – one Oil Thief per maintenance bay evacuation pump.
  • Allows oil sampling while oil is still hot, without employee hazard.
Operating Instructions:
  • The Oil Thief is compatible with any FLOCS evacuation unit.
  • Simply install an Oil Thief between the evacuation hose line and the coupling half; then attach a sample bottle.
  • Wait a few seconds after starting the evacuation cycle (to flush away any oil from the last evacuation); then depress the sample collection button for approximately ten seconds.
  • Release the button and remove the sample bottle.
  • Clean the Oil Thief sample bottle port, attach another bottle and you are ready for the next sample.
  • Note: When not in use, the Oil Thief should have a spare sample bottle attached to maintain valve cleanliness.
Part Number Sample Bottle Thread Size
(In Inches)
FF9300-75-0001 1.480-6 (or 38mm)

Additional Product Data:

Brand:
  • Hansen

Danfoss (Eaton - Aeroquip)

Danfoss is a global technology leader in power management solutions that make electrical, hydraulic and mechanical power operate more efficiently, reliably, safely and sustainably. Danfoss hydraulic pumps, motors, transmissions, valves, cylinders, controls, hose and fittings offer a unique combination of proven technology and innovative design that translates directly into reliable performance and enhanced uptime.

Explore Danfoss (Eaton - Aeroquip)

You may also like