DB600 by Jason Industrial | Double Bolt Hose Clamp | Hose OD Range From: 5-1/2" to 6-1/16" | Plated Ductile Iron
Buy more, save moreDiscounts applied in cart/checkout.
Clamps
Jason Industrial | Double Bolt Hose Clamp
These clamps provide an efficient means of securing couplings for low pressure discharge or suction service. Double bolt hose clamps are sized for hose OD's from 1-5/8" through 17-1/2". As the bolts are tightened, the double-tongue saddles fill the gap between the bolt lugs preventing pinching of the hose OD. Fully tightened, the double bolt clamps secure the full circumference of the hose.
1
What is this product used for?
- Secures couplings for low pressure discharge or suction service.
2
What are the main product features?
- As the bolts are tightened, the double-tongue saddles fill the gap between the bolt lugs preventing pinching of the hose OD.
- Fully tightened, the double bolt clamps secure the full circumference of the hose.
- Clamps are designed for one-time use.
3
What are the material specifications?
- Plated ductile iron.
4
What are the Instructions for Installing Double Bolt Hose Clamps?
- Bolts should be assembled dry.
- Proper clamp part number should be selected from chart to fit the appropriate size of hose and fully assemble onto a squarely cut hose fully inserted with all components in alignment.
- Bolts should be hand tightened until resistance is met as the hose is contacting the clamp halves.
- The bolts should be tightened sequentially one turn at a time to gradually pull the clamp halves evenly.
- Fully torque the bolts in this manner until the values shown in the chart are achieved.
- Do not exceed the recommended torque.
- Hoses will compress (cold flow) over time and periodically the bolts will need to be retorqued for optimum performance of the assembly. It is recommended that this retorquing be done daily for the first week of use, then check monthly as part of maintenance.
- WARNING! Re-tightening of clamps is necessary before each use. Regular inspection of the assembly is recommended. Always refer to manufacturer’s recommendations for torque and tightening sequence.
5
Which sizes or configurations are available?
| Part Number | Hose O.D. Range | Torquelbf-ft. | |
|---|---|---|---|
| From | To | ||
| DB049 | 1-5/8" | 1-15/16" | 15 lb ft |
| DB060 | 1-7/8" | 2-3/8" | 20 lb ft |
| DB076 | 2-3/8" | 3-1/16" | 20 lb ft |
| DB094 | 3-1/2" | 3-11/16" | 40 lb ft |
| DB400 | 3-1/2" | 4" | 40 lb ft |
| DB463 | 4-1/16" | 4-7/16" | 40 lb ft |
| DB525 | 4-3/16" | 5" | 60 lb ft |
| DB550 | 5" | 5-1/2" | 60 lb ft |
| DB600 | 5-1/2" | 6-1/16" | 60 lb ft |
| DB675 | 6-1/8" | 6-7/8" | 60 lb ft |
| DB769 | 6-15/16" | 7-5/8" | 60 lb ft |
| DB818 | 7-11/16" | 8-3/16" | 125 lb ft |
| DB875 | 8-1/4" | 8-7/8" | 125 lb ft |
| DB988 | 8-15/16" | 9-7/8" | 125 lb ft |
| DB1125 | 9-15/16" | 11-3/8" | 125 lb ft |
| DB1275 | 11-3/16" | 13" | 125 lb ft |
| DB1360 | 12-3/16" | 14" | 200 lb ft |
| DB1450 | 13-3/16" | 15" | 200 lb ft |
| DB1700 | 15-1/16" | 17-1/2" | 260 lb ft |
Additional Product Data:
Material(s):
Minimum Clamp I.D.:
5.50in
Maximum Clamp I.D.:
6.06in
