2BC075 by Jason Industrial | Interlocking Clamp | 2 Bolts | 3/4" Hose ID | OD Range From: 1-3/16" to 1-5/16"
Minimum Order Quantity: 5 Units
Buy more, save moreDiscounts applied in cart/checkout.
Clamps
Jason Industrial | Interlocking Clamp
These clamps are used on any fitting with a collar to engage the forward gripping fingers of the interlocking clamp. However, they are most commonly used on ground joint females and male collared nipples. Smaller sizes provide a safe and economical securing method for universal hose ends. The forward gripping fingers engage the collar preventing the shank or stem from pulling out. Tightening the bolts secures the clamp around the O.D. of the hose.
1
What is this product used for?
- Used on any fitting with a collar to engage the forward gripping fingers of the interlocking clamp.
- Most commonly used on ground joint females and male collared nipples.
2
What are the main product features?
- Clamps are designed for one-time use.
3
What are the Instructions for Installing 2, 4 and 6 Bolt Interlocking Clamps?
- Bolts should be assembled dry.
- Proper clamp part number should be selected from chart to fit the appropriate size of hose and fully assemble onto a squarely cut hose fully inserted with all components in alignment.
- Bolts should be hand tightened until resistance is met as the hose is contacting the clamp halves.
- The bolts should be tightened sequentially one turn at a time in opposing fashion to gradually pull the clamp halves evenly.
- On 6 bolt versions, the tightening should be done in opposing crossing fashion as done on wheels.
- Fully torque the bolts in this manner until the values shown in the chart are achieved.
- Do not exceed the recommended torque.
- Hoses will compress (cold flow) over time and periodically the bolts will need to be retorqued for optimum performance of the assembly. It is recommended that this retorquing be done daily for the first week of use, then check monthly as part of maintenance.
- WARNING! Re-tightening of clamps is necessary before each use. Regular inspection of the assembly is recommended. Always refer to manufacturer’s recommendations for torque and tightening sequence.
4
Which sizes or configurations are available?
| Part Number | Nominal Hose ID |
Outside Diameter Range | Number of Bolts |
Torque lbf-ft. |
Reference Number |
|||
|---|---|---|---|---|---|---|---|---|
| Inch | From | To | ||||||
| Inch | Decimal | Inch | Decimal | |||||
| 2BS038 | 3/8" | 11/16" | 0.69 | 3/4" | 0.75 | 2 | 6 | CD |
| 2BC050 | 1/2" | 15/16" | 0.94 | 1-1/16" | 1.06 | 2 | 6 | B4 |
| 2BS050 | 1/2" | 1" | 1.00 | 1-1/8" | 1.13 | 2 | 12 | A4 |
| 2BC051 | 1/2" | 1-1/16" | 1.06 | 1-3/16" | 1.19 | 2 | 12 | B5 |
| 2BS075 | 3/4" | 1-1/8" | 1.13 | 1-5/16" | 1.31 | 2 | 21 | A9 |
| 2BC075 | 3/4" | 1-3/16" | 1.19 | 1-5/16" | 1.31 | 2 | 21 | BU9 |
| 2BC076 | 3/4" | 1-5/16" | 1.31 | 1-1/2" | 1.50 | 2 | 21 | B9 |
| 2BC077 | 3/4" | 1-1/2" | 1.50 | 1-11/16" | 1.69 | 2 | 21 | B10 |
| 4BC100 | 1" | 1-17/32" | 1.53 | 1-23/32" | 1.72 | 4 | 21 | BU14 |
| 4BC100A | 1" | 1-13/32" | 1.41 | 1-9/16" | 1.56 | 4 | 21 | 156 |
| 4BC101 | 1" | 1-11/16" | 1.69 | 1-27/32" | 1.84 | 4 | 21 | B14 |
| 4BC102 | 1" | 1-7/8" | 1.88 | 2-1/16" | 2.06 | 4 | 21 | B15 |
| 4BC125 | 1-1/4" | 2-1/16" | 2.06 | 2-1/4" | 2.25 | 4 | 40 | B19 |
| 4BC150 | 1-1/2" | 2-3/32" | 2.09 | 2-9/32" | 2.28 | 4 | 40 | BU24 |
| 4BC151 | 1-1/2" | 2-1/4" | 2.25 | 2-7/16" | 2.44 | 4 | 40 | B24 |
| 4BC152 | 1-1/2" | 2-15/32" | 2.47 | 2-23/32" | 2.72 | 4 | 40 | B25 |
| 4BC200 | 2" | 2-1/2" | 2.50 | 2-25/32" | 2.78 | 4 | 60 | BU29 |
| 4BC201 | 2" | 2-3/4" | 2.75 | 3-1/16" | 3.06 | 4 | 60 | B29 |
| 4BC202 | 2" | 3-3/32" | 3.09 | 3-7/16" | 3.44 | 4 | 60 | B30 |
| 4BC250 | 2-1/2" | 3-1/2" | 3.50 | 3-15/16" | 3.94 | 4 | 150 | B34 |
| 4BC300 | 3" | 3-13/16" | 3.81 | 4-1/16" | 4.06 | 4 | 150 | B35 |
| 4BC301 | 3" | 4-1/16" | 4.06 | 4-7/16" | 4.44 | 4 | 200 | B39 |
| 6BC400 | 3" | 4-1/4" | 4.25 | 4-13/16" | 4.81 | 6 | 150 | BS39 |
| 6BC401 | 4" | 4-7/8" | 4.88 | 5-5/16" | 5.31 | 6 | 200 | BS49 |
Additional Product Data:
Material(s):
Minimum Clamp I.D.:
1.19in
Maximum Clamp I.D.:
1.31in
