2910873-25 SILBRADE® by NewAge | Medical Grade Braid Reinforced Silicone Hose | 1" ID x 1.380" OD x .180" Wall | Natural | 25ft

SPECIFICATIONS

Application:	Adhesives, Aerospace, Biological Fluids, Blood & Fluid Handling, Cell Culture, Clean Room Applications, Food, Hot Viscous Material, Laboratory, Medical, Pharmaceutical, Sterile Filling, Vaccines	Tube:	Peroxide Cured Silicone
Reinforcement:	Braid Reinforced	Cover:	N/A
Temperature Range:	350°F	Color:	Natural
Opacity:	Translucent	Specifications	Animal-Derived Ingredient Free, BPA Free, FDA 21 CFR 177.2600, Latex Free, Phthalate Free, REACH, RoHS, USP class VI
Other Features:
Open mesh polyester braiding incorporated within the walls of silicone tubing Finished product meets USP Class VI requirements Translucent natural color for visual contact with the flow Able to resist extreme temperature variation: -99°F to 350°F Reusable - will withstand repeated sterilization^ Odorless, tasteless, and inert Raw materials meet FDA requirements per FDA 21 CFR 177.2600 for use with food contact surfaces Manufactured under good manufacturing procedures in a controlled environment Free of BPA, latex and phthalates REACH and RoHS compliant Made in the USA
Notes:
SILBRADE® MEDICAL's construction consists of a core of silicone elastomer, an open polyester braid reinforcing layer, and a cover layer of silicone elastomer. Good manufacturing procedures, including lot traceability, are applicable to all Class VI ingredients. SILBRADE® MEDICAL is a peroxide-cured product. The hose's smooth bore, coupled with its resistance to allow material to adhere to the tube wall, facilitates easy cleaning and system purging. ^SILBRADE® MEDICAL may be low pressure sterilized in-line or autoclaved up to 250°F in a normal autoclaving cycle. If exposed to repeated steam sterilization or long term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced. Care is recommended in the selection and application of fittings and clamps, as sharp barbed fittings or unlined clamps could tear into the hose wall and possibly cause a failure, especially at elevated pressures. Peroxide-cured SILBRADE® MEDICAL hose is supplied in individual, non-sterile, heat-sealed polybags and should be sterilized prior to use. SILBRADE® MEDICAL is not recommended for implantable or in-body uses or for continuous steam applications.

Physical Properties**
Hardness, Shore A ±5 - Liner	70
Hardness, Shore A ±5 - Cover	60
Tensile Strength, psi	1460
Elongation at Break, %	320
Tear Strength, Die B, ppi	100
Modulus at 100 %, psi	415
Brittle Temperature, °F	-99
Max. Operating Temperature, °F	350

**Values listed are typical for the material used in manufacture except where noted, apply to the hose liner except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.

Part Number	Inside Diameter (in.)	Outside Diameter (in.)	Wall Thickness (in.)	Length	Working PSI (at 70°F)	Color	Weight (lbs/100 ft)
2910334-25	0.250" (1/4")	0.520"	0.135"	25 ft	208 PSI	Natural	9 lbs
2910411-25	0.313" (5/16")	0.592"	0.140"	25 ft	183 PSI	Natural	11 lbs
2910488-25	0.375" (3/8")	0.655"	0.140"	25 ft	166 PSI	Natural	13 lbs
2910565-25	0.500" (1/2")	0.800"	0.150"	25 ft	141 PSI	Natural	17 lbs
2910719-25	0.750" (3/4")	1.100"	0.175"	25 ft	91 PSI	Natural	28 lbs
2910873-25	1.000"	1.380"	0.180"	25 ft	75 PSI	Natural	36 lbs

Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.
The burst pressure can be expected to decrease by at least 20% for each 200°F increase up to 350°F.