2900226-100 SILBRADE® by NewAge | Braid Reinforced Silicone Hose | 1/4" ID x 0.520" OD x 0.135" Wall | Natural | 100ft

Application:	Adhesives, Beverage, Chemicals, Deionized Water Transfer, Fermenter Lines, Food, Hot Fill Lines, Laboratory, Medical, Resin Feeds, Stirring Vessels, Viscous Material Handling	Tube:	Peroxide Cured Silicone
Reinforcement:	Braid Reinforced	Cover:	N/A
Temperature Range:	350°F	Color:	Natural
Opacity:	Translucent	Specifications	Animal-Derived Ingredient Free, BPA Free, FDA 21 CFR 177.2600, Latex Free, Phthalate Free, REACH, RoHS, NSF-51 listed for food equipment materials
Other Features:
Open mesh polyester braiding incorporated within the walls of silicone tubing Raw materials meet FDA requirements per FDA 21 CFR 177.2600 for use with food contact surfaces Reusable - will withstand repeated sterilization^ Translucent natural color for visual contact with the flow Able to resist extreme temperature variation: -99°F to 350°F Odorless, tasteless, and inert Excellent weatherability properties - resists U.V., ozone, gases, moisture, and extreme temperatures Offers far higher pressure capabilities than similarly-sized unreinforced silicone tubing Listed by the National Sanitation Foundation (NSF-51) for food equipment materials Free of BPA, latex and phthalates; REACH and RoHS compliant Made in the USA
Notes:
The construction of SILBRADE® enables silicone tubing to handle increased pressure applications. SILBRADE® offers outstanding resistance to temperature extremes and is made from raw materials that meet FDA requirements. The flexible design and construction of SILBRADE also allows excellent bend radii and permits installation in restricted spaces without impeding flow. SILBRADE®, a peroxide-cured product, contains no sulphur or other acid-producing chemicals thereby eliminating the possibility of staining, corroding, or deteriorating other materials it contacts. It is also resistant to ozone and U.V. over long time periods. Care is recommended in the selection of fittings and clamps, as sharp barbed fittings or unlined metal clamps could tear into the hose wall and possibly cause a failure, especially at elevated pressures. ^SILBRADE® may be low pressure steam sterilized in-line or autoclaved at up to 250°F in a normal autoclaving cycle. However, if exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced. SILBRADE® is not recommended for implantable or in-body uses or for continuous steam applications.

Physical Properties**
Hardness, Shore A ±5 - Liner	70
Hardness, Shore A ±5 - Cover	60
Tensile Strength, psi	1460
Elongation at Break, %	320
Tear Strength, Die B, ppi	100
Modulus at 100 %, psi	415
Brittle Temperature, °F	-99
Max. Operating Temperature, °F	350

**Values listed are typical for the material used in manufacture except where noted, apply to the hose liner except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.

Part Number	Inside Diameter (in.)	Outside Diameter (in.)	Wall Thickness (in.)	Length	Working PSI (at 70°F)	Color
2900072-100	0.125" (1/8")	0.365"	0.120"	100 ft	233 PSI	Natural
2900149-100	0.188" (3/16")	0.447"	0.130"	100 ft	216 PSI	Natural
2900226-100	0.250" (1/4")	0.520"	0.135"	100 ft	208 PSI	Natural
2900303-100	0.313" (5/16")	0.592"	0.140"	100 ft	183 PSI	Natural
2900380-100	0.375" (3/8")	0.655"	0.140"	100 ft	166 PSI	Natural
2900457-50	0.500" (1/2")	0.800"	0.150"	50 ft	141 PSI	Natural
2900457-100	0.500" (1/2")	0.800"	0.150"	100 ft	141 PSI	Natural

Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.
The burst pressure can be expected to decrease by at least 20% for each 200°F increase up to 350°F.